DIGITROL II
The DigiTrol II uses a microprocessor-based,user-selectablecontrol mode temperature
control. The control features a digital dual output display forset point and process
temperature indication. The automatic-tuning feature ensuresincreased temperature
accuracy with minimum overshoot. Easy set-up and simple inputcommands make this
control very “user friendly.” The load and the thermocouplereceptacles are located
on the front panel for easy accessibility.Features automaticcold junction compensation
and thermocouple break protection.
Furnished with an immersion thermocouple with 6"-long stainlesssteel probe.
Specifications
Electrical: Lighted on/off power switch with auxiliary LEDindication, fuse protection,
3-wire load receptacle, and 3-wire line cord with moldedplug.
Control Type: PID parameters with auto/manual mode option.
Accuracy: 0.1% of span.
Display: Dual, 4-digit LED.
Set Point: Up/down keys. °F or °C display,
user selectable.
104A PL612 15A@120V, 1,800W 0-750°C Type J 3.0
104A PL612K 15A@120V, 1,800W -200-1250°C Type K 3.0
104A PL612T 15A@120V, 1,800W -200-350°C Type T 3.0
104A PL624 10A@240V, 2,400W 0-750°C Type J 3.0
104A PL624K 10A@240V, 2,400W -200-1250°C Type K 3.0
104A PL624T 10A@240V, 2,400W -200-350°C Type T 3.0
